CHAPTER
Env-A 500 Standards APPLICABLE TO cERTAIN nEW OR mODIFIED fACILITIES AND
SOURCES OF HAZARDOUS AIR POLLUTANTS; STATE PLANS FOR DESIGNATED FACILITIES AND
POLLUTANTS
Statutory
Authority: RSA 125-C:4
PART
Env-A 501 PURPOSE
Env-A 501.01 Purpose. The purpose of this chapter is to establish
state standards to regulate:
(a)
Certain new or modified facilities in accordance with authority
delegated by the EPA under §111(c) of the Clean Air Act;
(b)
Certain sources of hazardous air pollutants in accordance with authority
delegated by the EPA under §112 of the Clean Air Act;
(c)
Certain sewage sludge incineration units that commenced construction on
or before October 14, 2010 in accordance with
authority delegated by the EPA under §129(b)(2) of the Clean Air Act; and
(d) Certain municipal
solid waste landfills that commenced construction on or before July 17, 2014 and have not been modified or reconstructed since July
17, 2014 in accordance with authority delegated by the
EPA under §111(d) of the Clean Air Act.
Source. #721.19, eff 12-7-75; ss by #1717, eff
2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff 12-27-84; ss by #5033, eff
12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; ss by #9643, eff 1-23-10;
ss by #12387, eff 9-22-17; ss by #13381, eff 5-25-22
PART Env-A
502 references
Env-A 502.01 References.
(a)
For the purpose of this chapter, unless otherwise specified all
references to 40
(b)
If any requirement specified in Env-A 503.01, Env-A 504.01, Env-A
505.01, or Env-A 506.01 is inconsistent with any requirement specified in other
provisions of Env-A 100 et seq., NH Rules Governing the Control
of Air Pollution, the more stringent requirement shall control.
Source. #721.19, eff 12-7-75; ss by #1717, eff
2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff 12-27-84; ss by #5033, eff
12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; amd
by #7840, eff 3-1-03; amd by #8041, eff 2-14-04; amd by #8277, eff 1-28-05; amd by
#8535, eff 12-31-05; amd by #8876, eff 4-27-07; amd by #9489, eff 6-23-09; ss by #9643, eff 1-23-10; ss by
#9864, eff 2-10-11; amd by #10076, eff 1-25-12; amd by #10254, eff 1-23-13; amd
by #10980, eff 11-20-15; ss by #12387, eff 9-22-17; ss by #13209, eff 5-25-21;
ss by #13381, eff 5-25-22; ss by #13381, eff 5-25-22; ss by #14118, eff
11-23-24, EXPIRES 11-23-34
PART
Env-A 503 New Source Performance Standards
Env-A 503.01 New Source Performance Standards. The owner or operator of a new or modified
facility shall comply with the following provisions of 40 CFR 60, Standards of
Performance for New Stationary Sources, as applicable:
(a)
Subpart A, General Provisions, except for §§60.4, 60.9, 60.10, and
60.16;
(b) Subpart D, Standards of
Performance for Fossil-Fuel-Fired Steam Generators for which Construction is
Commenced after August 17, 1971;
(c) Subpart Da, Standards of
Performance for Electric Utility Steam Generating Units for which Construction
is Commenced after September 18, 1978;
(d) Subpart Db, Standards of
Performance for Industrial-Commercial-Institutional Steam Generating Units;
(e) Subpart Dc, Standards of
Performance for Small Industrial-Commercial-Institutional Steam Generating
Units;
(f) Subpart E, Standards of
Performance for Incinerators;
(g) Subpart Ea,
Standards of Performance for Municipal Waste Combustors for Which Construction Is
Commenced After December 20, 1989 and On or Before September
20, 1994;
(h) Subpart Eb, Standards of
Performance for Large Municipal Waste Combustors for Which Construction is
Commenced After September 20, 1994 or for Which Modification
or Reconstruction is Commenced After June 19, 1996;
(i) Subpart Ec, Standards of Performance for New Stationary Sources:
Hospital/Medical/Infectious Waste Incinerators for which Construction is
Commenced after June 20, 1996;
(j) Subpart I, Standards of
Performance for Hot Mix Asphalt Facilities;
(k) Subpart J, Standards of
Performance for Petroleum Refineries;
(l) Subpart Ja, Standards of Performance for Petroleum Refineries
for Which Construction, Reconstruction, or Modification Commenced After May 14,
2007;
(m) Subpart K, Standards of
Performance for Storage Vessels for Petroleum Liquids for Which Construction,
Reconstruction, or Modification Commenced After June 11, 1973, and Prior to May
19, 1978;
(n) Subpart Ka, Standards of
Performance for Storage Vessels for Petroleum Liquids for Which Construction,
Reconstruction, or Modification Commenced After May 18, 1978, and Prior to July
23, 1984;
(o) Subpart Kb,
Standards of Performance for Volatile Organic Liquid Storage Vessels (Including
Petroleum Liquid Storage Vessels) for Which Construction, Reconstruction, or
Modification Commenced After July 23, 1984;
(p) Subpart L, Standards of
Performance for Secondary Lead Smelters for Which Construction, Reconstruction,
or Modification Commenced After June 11, 1973, and On or Before December 1,
2022;
(q) Subpart M, Standards of
Performance for Secondary Brass and Bronze Production Plants;
(r) Subpart N, Standards of
Performance for Primary Emissions from Basic Oxygen Process Furnaces for Which Construction
is Commenced After June 11, 1973;
(s) Subpart O, Standards of
Performance for Sewage Treatment Plants;
(t) Subpart Y, Standards of
Performance for Coal Preparation and Processing Plants;
(u) Subpart AA, Standards of
Performance for Steel Plants: Electric Arc Furnaces Constructed After October
21, 1974 and On or Before August 17, 1983;
(v) Subpart AAa,
Standards of Performance for Steel Plants: Electric Arc Furnaces and
Argon-Oxygen Decarbonization Vessels Constructed After August 17, 1983 and On or Before May 16, 2022;
(w) Subpart BB, Standards of
Performance for Kraft Pulp Mills;
(x) Subpart DD, Standards of
Performance for Grain Elevators;
(y) Subpart EE, Standards of
Performance for Surface Coating of Metal Furniture;
(z) Subpart GG, Standards of
Performance for Stationary Gas Turbines;
(aa) Subpart KK, Standards of
Performance for Lead-Acid Battery Manufacturing Plants for Which Construction,
Reconstruction, or Modification Commenced After January 14, 1980
and On or Before February 23, 2022;
(ab) Subpart KKa,
Standards of Performance for Lead Acid Battery Manufacturing Plants for Which
Construction, Modification or Reconstruction Commenced After February 23, 2022;
(ac) Subpart LL, Standards of
Performance for Metallic Mineral Processing Plants;
(ad) Subpart
MM, Standards
of Performance for Automobile and Light Duty Truck Surface Coating Operations
for which Construction, Modification or Reconstruction Commenced After October
5, 1979, and On or Before May 18, 2022;
(ae) Subpart
MMa, Standards of Performance for Automobile and Light Duty
Truck Surface Coating Operations for which Construction, Modification or
Reconstruction Commenced After May 18, 2022;
(af) Subpart
QQ, Standards of Performance for the Graphic Arts Industry: Publication
Rotogravure Printing;
(ag) Subpart RR, Standards of
Performance for Pressure Sensitive Tape and Label Surface Coating Operations;
(ah) Subpart TT, Standards of
Performance for Metal Coil Surface Coating;
(ai) Subpart UU, Standards of
Performance for Asphalt Processing and Asphalt Roofing Manufacture;
(aj) Subpart
VV, Standards of Performance for Equipment Leaks of VOC in the Synthetic
Organic Chemicals Manufacturing Industry for Which Construction,
Reconstruction, or Modification Commenced After January 15, 1981, and on or
Before November 7, 2006;
(ak) Subpart VVa, Standards of
Performance for Equipment Leaks of VOC in the Synthetic Organic Chemicals
Manufacturing Industry for Which Construction, Reconstruction, or Modification
Commenced after November 7, 2006 and on or Before
April 25, 2023;
(al) Subpart WW, Standards of
Performance for the Beverage Can Surface Coating Industry;
(am) Subpart XX, Standards of
Performance for Bulk Gasoline Terminals That Commenced Construction,
Modification, or Reconstruction After December 17, 1980, and On or Before June
10, 2022;
(an) The following sections of Subpart
AAA, Standards of Performance for New Residential Wood Heaters:
(1)
§§60.530-531;
(2)
§60.532(a)-(c);
(3)
§60.536(a)-(f); and
(4)
§60.538(a)-(d) and (g)-(i);
(ao) Subpart
BBB, Standards of Performance for the Rubber Tire Manufacturing Industry;
(ap) Subpart FFF, Standards of
Performance for Flexible Vinyl and Urethane Coating and Printing;
(aq) Subpart
GGG, Standards of Performance for Equipment Leaks of VOC in Petroleum
Refineries for which Construction, Reconstruction, or Modification Commenced
After January 4, 1983 and on or Before November 7,
2006;
(ar) Subpart
HHH, Standards of Performance for Synthetic Fiber Production Facilities;
(as) Subpart JJJ, Standards of
Performance for Petroleum Dry Cleaners;
(at) Subpart NNN, Standards of
Performance for Volatile Organic Compound (VOC) Emissions from Synthetic
Organic Chemical Manufacturing Industry (SOCMI) Distillation Operations After
December 30, 1983 and on or Before April 25, 2023;
(au) Subpart OOO, Standards of
Performance for Nonmetallic Mineral Processing Plants;
(av) Subpart QQQ, Standards of
Performance for VOC Emissions from Petroleum Refinery Wastewater Systems;
(aw) Subpart SSS, Standards of
Performance for Magnetic Tape Coating Facilities;
(ax) Subpart TTT, Standards of
Performance for Industrial Surface Coating: Surface Coating of Plastic Parts
for Business Machines;
(ay) Subpart TTTa,
Standards
of Performance for Industrial Surface Coating: Surface Coating of Plastic Parts
for Business Machines for Which Construction, Reconstruction, or Modification
Commenced After June 21, 2022;
(az) Subpart
UUU, Standards of Performance for Calciners and Dryers in Mineral Industries;
(ba) Subpart
VVV, Standards of Performance for Polymeric Coating of Supporting Substrates
Facilities;
(bb) Subpart WWW, Standards of
Performance for Municipal Solid Waste Landfills That Commenced Construction,
Reconstruction, or Modification on or After May 30, 1991, but Before July 18,
2014 ;
(bc) Subpart
XXX, Standards of Performance for Municipal Solid Waste Landfills That
Commenced Construction, Reconstruction, or Modification After July 17, 2014,
effective August 29, 2016;
(bd) Subpart AAAA, Standards of
Performance for Small Municipal Waste Combustion Units for Which Construction
or Reconstruction is Commenced After August 30, 1999
or for Which Modification or Reconstruction is Commenced After June 6, 2001;
(be) Subpart CCCC, Standards of
Performance for Commercial and Industrial Solid Waste Incineration Units;
(bf) Subpart EEEE, Standards of
Performance for Other Solid Waste Incineration Units for Which Construction is
Commenced After December 9, 2004, or for Which Modification or Reconstruction
is Commenced on or After June 16, 2006;
(bg) Subpart
IIII, Standards of Performance for Stationary Compression Ignition Internal
Combustion Engines;
(bh) Subpart
JJJJ, Standards of Performance for Stationary Spark Ignition Internal
Combustion Engines;
(bi) Subpart KKKK, Standards of
Performance for Stationary Combustion Turbines;
(bj) Subpart
LLLL, Standards of Performance for New Sewage Sludge Incineration Units;
(bk) Subpart OOOO, Standards of
Performance for Crude Oil and Natural Gas Facilities for Which Construction,
Modification or Reconstruction Commenced after August 23, 2011, and on or Before
September 18, 2015;
(bl) Subpart OOOOa,
Standards of Performance for Crude Oil and Natural Gas Facilities for Which
Construction, Modification or Reconstruction Commenced After September 18, 2015 and On or Before December 6, 2022;
(bm) The following sections of Subpart
QQQQ, Standards of Performance for New Residential Hydronic Heaters and
Forced-Air Furnaces:
(1)
§§60.5472-5473;
(2)
§60.5474(a) and (b);
(3)
§60.5478(a)-(e); and
(4)
§60.5480(a)-(d) and (g)-(i); and
(bn) Subpart TTTT, Standards of
Performance for Greenhouse Gas Emissions for Electric Utility Generating Units.
Source. #721.19, eff 12-7-75; ss by #1717, eff
2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff 12-27-84; ss by #5033, eff
12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; amd by #8876, eff 4-27-07;
amd by #9489, eff 6-23-09; ss by #9643, eff 1-23-10; amd by #10076, eff 1-25-12;
amd by #10980, eff 11-20-15; ss by #12387, eff
9-22-17; ss by #13209, eff 5-25-21; ss by #13381, eff 5-25-22; ss by #14118,
eff 11-23-24, EXPIRES: 11-23-34
PART
Env-A 504 National Emission Standards for Hazardous Air Pollutants
Env-A 504.01 National Emission Standards for Hazardous
Air Pollutants. The owner or
operator of any stationary source that emits a hazardous air pollutant
regulated under 40 CFR 61, National Emission Standards for Hazardous Air
Pollutants, shall comply with the following provisions of 40 CFR 61, as
applicable:
(a)
Subpart A, General Provisions;
(b)
Subpart C, National Emission Standards for Beryllium;
(c)
Subpart E, National Emission Standards for Mercury;
(d)
Subpart J, National Emission Standards for Equipment Leaks, Fugitive
Emission Sources, of Benzene;
(e)
Subpart M, National Emission Standards for Asbestos,
as incorporated by reference in Env-A 1800, with amendments;
(f)
Subpart V, National Emission Standards for Equipment Leaks, Fugitive
Emission Sources; and
(g)
Subpart FF, National Emission Standards for Benzene Waste Operations.
Source. #721.19, eff 12-7-75; ss by #1717, eff
2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff 12-27-84; ss by #5033, eff
12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; ss by #8277, eff 1-28-05;
ss by #8535, eff 12-31-05;
ss by #9643, eff 1-23-10; ss by #12387, eff 9-22-17; ss by #13209, eff 5-25-21
PART
Env-A 505 National Emission Standards for Hazardous Air Pollutants for Source
Categories
Env-A 505.01 National Emission Standards for Hazardous
Air Pollutants for Source Categories.
The owner or operator of any stationary source that emits a hazardous
air pollutant listed pursuant to Section 112(b) of the Clean Air Act shall
comply with the following provisions of 40 CFR 63, National Emission Standards
for Hazardous Air Pollutants for Source Categories, as applicable, unless a
title V permit with equivalent terms has been issued for such source in
accordance with 40 CFR §63.94:
(a)
Subpart A, General Provisions;
(b)
Subpart D, Regulations Governing Compliance Extensions for Early
Reductions of Hazardous Air Pollutants;
(c)
Subpart F, National Emission Standards for Organic Hazardous Air
Pollutants from the Synthetic Organic Chemical Manufacturing Industry;
(d)
Subpart G, National Emission Standards for Organic Hazardous Air
Pollutants from the Synthetic Organic Chemical Manufacturing Industry for
Process Vents, Storage Vessels, Transfer Operations, and Wastewater;
(e) Subpart H, National Emission
Standards for Organic Hazardous Air Pollutants for Equipment Leaks;
(f)
Subpart I, National Emission Standards for Organic Hazardous Air
Pollutants for Certain Processes Subject to the Negotiated Regulation for
Equipment Leaks;
(g)
Subpart J, National Emission Standards for Hazardous Air Pollutants for
Polyvinyl Chloride and Copolymers Production;
(h)
Subpart L, National Emission Standards for Hazardous Air Pollutants for
Coke Oven Batteries;
(i) Subpart N, National Emission Standards for
Chromium Emissions from Hard and Decorative Chromium Electroplating and
Chromium Anodizing Tanks;
(j)
Subpart O, Ethylene Oxide Emissions Standards for Sterilization
Facilities;
(k)
Subpart Q, National Emission Standards for Hazardous Pollutants for
Industrial Process Cooling Towers;
(l)
Subpart R, National Emission Standards for Gasoline Distribution
Facilities, Bulk Gasoline Terminals and Pipeline Breakout Stations;
(m)
Subpart S, National Emission Standards for Hazardous Air Pollutants from
the Pulp and Paper Industry;
(n)
Subpart T, National Emission Standards for Halogenated Solvent Cleaning;
(o) Subpart U, National Emission Standards for
Hazardous Air Pollutant Emissions: Group I Polymers and Resins;
(p) Subpart W, National Emission
Standards for Hazardous Air Pollutants for Epoxy Resins Production and
Non-nylon Polyamides Production;
(q) Subpart X, National Emission
Standards for Hazardous Air Pollutants from Secondary Lead Smelting;
(r)
Subpart Y, National Emission Standards for Marine Tank Vessel Loading
Operations;
(s)
Subpart AA, National Emission Standards for Hazardous Air Pollutants
from Phosphoric Acid Manufacturing Plants;
(t)
Subpart BB, National Emission Standards for Hazardous Air Pollutants
from Phosphate Fertilizer Production Plants;
(u) Subpart CC, National Emission Standards for
Hazardous Air Pollutants from Petroleum Refineries;
(v) Subpart EE, National Emission
Standards for Hazardous Air Pollutants for Magnetic Tape Manufacturing
Operations;
(w)
Subpart GG, National Emission Standards for Aerospace Manufacturing and
Rework Facilities;
(x)
Subpart HH, National Emission Standards for Hazardous Air Pollutants
from Oil and Natural Gas Production Facilities;
(y)
Subpart II, National Emission Standards for Shipbuilding and Ship
Repair, Surface Coating;
(z)
Subpart JJ, National Emission Standards for Wood Furniture Manufacturing
Operations;
(aa)
Subpart KK, National Emission Standards for the Printing and Publishing
Industry;
(ab)
Subpart LL, National Emission Standards for Hazardous Air Pollutants for
Primary Aluminum Reduction Plants;
(ac)
Subpart MM, National Emission Standards for Hazardous Air Pollutants for
Chemical Recovery Combustion Sources at Kraft, Soda, Sulfite, and Stand-Alone
Semichemical Pulp Mills;
(ad)
Subpart OO, National Emission Standards for Tanks – Level 1;
(ae)
Subpart PP, National Emission Standards for Containers;
(af) Subpart QQ, National Emission Standards for
Surface Impoundments;
(ag)
Subpart RR, National Emission Standards for Individual Drain Systems;
(ah)
Subpart SS, National Emission Standards for Closed Vent Systems, Control
Devices, Recovery Devices and Routing to a Fuel Gas System or a Process;
(ai)
Subpart TT, National Emission Standards for Equipment Leaks – Control
Level 1;
(aj) Subpart UU, National Emission Standards for
Equipment Leaks – Control Level 2 Standards;
(ak) Subpart
VV, National Emission Standards for Oil-Water Separators and Organic-Water
Separators;
(al)
Subpart WW, National Emission Standards for Storage Vessels, Tanks, –
Control Level 2;
(am)
Subpart YY, National Emission Standards for Hazardous Air Pollutants for
Source Categories: Generic Maximum Achievable Control Technology Standards;
(an)
Subpart CCC, National Emission Standards for Hazardous Air Pollutants
for Steel Pickling – HCI Process Facilities and Hydrochloric Acid Regeneration
Plants;
(ao) Subpart DDD, National Emission Standards for
Hazardous Air Pollutants for Mineral Wool Production;
(ap)
Subpart EEE, National Emission Standards for Hazardous Air Pollutants
from Hazardous Waste Combustors;
(aq) Subpart GGG, National Emission Standards for
Pharmaceuticals Production;
(ar) Subpart HHH, National Emission Standards for
Hazardous Air Pollutants from Natural Gas Transmission and Storage Facilities;
(as)
Subpart III, National Emission Standards for Hazardous Air Pollutants
for Flexible Polyurethane Foam Production;
(at) Subpart JJJ, National Emission
Standards for Hazardous Air Pollutant Emissions: Group IV Polymers and Resins;
(au) Subpart LLL, National Emission
Standards for Hazardous Air Pollutants from the Portland Cement Manufacturing
Industry;
(av)
Subpart MMM, National Emission Standards for Hazardous Air Pollutants
for Pesticide Active Ingredient Production;
(aw)
Subpart NNN, National Emission Standards for Hazardous Air Pollutants
for Wool Fiberglass Manufacturing;
(ax)
Subpart OOO, National Emission Standards for Hazardous Air Pollutant
Emissions: Manufacture of Amino/Phenolic Resins;
(ay)
Subpart PPP, National Emission Standards for Hazardous Air Pollutant
Emissions for Polyether Polyols Production;
(az) Subpart QQQ, National Emission Standards for
Hazardous Air Pollutants for Primary Copper Smelting;
(ba) Subpart
RRR, National Emission Standards for Hazardous Air Pollutants for Secondary
Aluminum Production;
(bb) Subpart TTT, National Emission
Standards for Hazardous Air Pollutants for Primary Lead Smelting;
(bc)
Subpart UUU, National Emission Standards
for Hazardous Air Pollutants for Petroleum Refining: Catalytic Cracking Units, Catalytic Reforming
Units, and Sulfur Recovery Units;
(bd) Subpart VVV, National Emission
Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works;
(be) Subpart XXX, National Emission
Standards for Hazardous Air Pollutants for Ferroalloys Production:
Ferromanganese and Silicomanganese;
(bf)
Subpart AAAA, National Emission Standards for Hazardous Air
Pollutants: Municipal Solid Waste
Landfills;
(bg) Subpart CCCC, National Emission Standards for
Hazardous Air Pollutants for Manufacturing Nutritional Yeast;
(bh) Subpart DDDD,
National Emission Standards for Hazardous Air Pollutants for Plywood and
Composite Wood Products;
(bi) Subpart EEEE, National Emission Standards for
Hazardous Air Pollutants for Organic Liquids Distribution (Non-Gasoline);
(bj) Subpart
FFFF, National Emission Standards for Hazardous Air Pollutants for
Miscellaneous Organic Chemical Manufacturing;
(bk) Subpart GGGG, National Emission Standards for
Hazardous Air Pollutants for Solvent Extraction for Vegetable Oil Production;
(bl) Subpart HHHH, National Emission Standards for
Hazardous Air Pollutants for Wet Formed Fiberglass Mat Production;
(bm)
Subpart IIII, National Emission Standards for Hazardous Air Pollutants
for Surface Coating of Automobiles and Light-Duty Trucks;
(bn) Subpart JJJJ, National Emission Standards for
Hazardous Air Pollutants for Paper and Other Web Coating;
(bo) Subpart KKKK,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Cans;
(bp) Subpart MMMM, National Emission Standards for
Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and
Products;
(bq) Subpart NNNN,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Large Appliances;
(br) Subpart OOOO,
National Emission Standards for Hazardous Air Pollutants for Printing, Coating,
and Dyeing of Fabrics and Other Textiles;
(bs) Subpart PPPP, National Emission Standards for
Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products;
(bt) Subpart QQQQ,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Wood Building Products;
(bu) Subpart RRRR,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Furniture;
(bv) Subpart SSSS,
National Emission Standards for Hazardous Air Pollutants for Surface Coating of
Metal Coils;
(bw) Subpart TTTT,
National Emission Standards for Hazardous Air Pollutants for Leather Finishing
Operations;
(bx)
Subpart UUUU, National Emission Standards for Hazardous Air Pollutants
for Cellulose
Production Manufacturing;
(by)
Subpart VVVV, National Emission Standards for Hazardous Air Pollutants for Boat
Manufacturing;
(bz) Subpart WWWW,
National Emissions Standards for Hazardous Air Pollutants for Reinforced
Plastic Composites Production;
(ca) Subpart XXXX, National Emissions Standards
for Hazardous Air Pollutants for Rubber Tire Manufacturing;
(cb) Subpart YYYY, National Emission Standards for Hazardous
Air Pollutants for Stationary Combustion Turbines;
(cc)
Subpart ZZZZ, National Emission Standards for Hazardous Air Pollutants for
Stationary Reciprocating Internal Combustion Engines;
(cd) Subpart AAAAA, National Emission
Standards for Hazardous Air Pollutants for Lime Manufacturing Plants;
(ce) Subpart BBBBB,
National Emission Standards for Hazardous Air Pollutants for Semiconductor
Manufacturing;
(cf) Subpart CCCCC,
National Emission Standards for Hazardous Air Pollutants for Coke Ovens:
Pushing, Quenching, and Battery Stacks;
(cg) Subpart
DDDDD, National Emission Standards for Hazardous Air Pollutants for Industrial,
Commercial, and Institutional Boilers and Process Heaters;
(ch) Subpart EEEEE,
National Emission Standards for Hazardous Air Pollutants for Iron and Steel
Foundries;
(ci) Subpart FFFFF, National Emission Standards
for Hazardous Air Pollutants for Integrated Iron and Steel Manufacturing
Facilities;
(cj) Subpart GGGGG,
National Emission Standards for Hazardous Air Pollutants for Site
Remediations;
(ck)
Subpart HHHHH, National Emission Standards for Hazardous Air Pollutants
for Miscellaneous Coating Manufacturing;
(cl)
Subpart IIIII, National Emission Standards for Hazardous Air Pollutants
for Mercury Cell Chlor-Alkali Plants;
(cm)
Subpart JJJJJ, National Emission Standards for Hazardous Air Pollutants for
Brick and Structural Clay Products;
(cn) Subpart KKKKK,
National Emission Standards for Hazardous Air Pollutants for Clay Ceramics
Manufacturing;
(co)
Subpart
LLLLL, National Emission Standards for Hazardous Air Pollutants for Asphalt Processing
and Asphalt Roofing Manufacturing;
(cp)
Subpart MMMMM, National Emission Standards for Hazardous Air Pollutants for
Flexible Polyurethane Foam Fabrication Operations;
(cq) Subpart NNNNN,
National Emission Standards for Hazardous Air Pollutants for Hydrochloric Acid
Production;
(cr) Subpart PPPPP,
National Emission Standards for Hazardous Air Pollutants for Engine Test
Cells/Stands;
(cs)
Subpart QQQQQ, National Emission Standards for Hazardous Air Pollutants for
Friction Materials Manufacturing Facilities;
(ct) Subpart RRRRR,
National Emission Standards for Hazardous Air Pollutants for Taconite Iron Ore
Processing;
(cu)
Subpart SSSSS, National Emission Standards for Hazardous Air Pollutants for
Refractory Products Manufacturing;
(cv)
Subpart TTTTT, National Emission Standards for Hazardous Air Pollutants for
Primary Magnesium Refining;
(cw) Subpart UUUUU,
National Emission Standards for Hazardous Air Pollutants from Coal- and
Oil-Fired Electric Utility Steam Generating Units; and
(cx) Subpart JJJJJJ, National Emission Standards
for Hazardous Air Pollutants for Area Sources from Industrial, Commercial, and
Institutional Boilers, only if a source is currently permitted or will be
required to be permitted under Env-A 607.01(a), (b), or (c).
Source. #721.19, eff 12-7-75; ss by #1717, eff
2-19-81; ss by #2332, eff 4-29-83; ss by #2938, eff 12-27-84; ss by #5033, eff
12-27-90, EXPIRED: 12-27-96
New. #7672, eff 4-5-02; amd by #7840, eff 3-1-03;
amd by #8041, eff 2-14-04; amd by #8277, eff 1-28-05; amd by #8535, eff
12-31-05; amd by #8876, eff 4-27-0-7; amd by #9489, eff 6-23-09; ss by #9643,
eff 1-23-10; amd by #10254, eff 1-23-13; amd by #10980, eff 11-20-15; ss by #12387, eff 9-22-17
PART Env-A
506 STATE PLANS FOR DESIGNATED
FACILITIES AND POLLUTANTS
Env-A 506.01 State Plans for Designated Facilities and
Pollutants. The owner or operator of
a designated stationary source shall comply with the following subparts of
40 CFR 62, Approval and Promulgation of State Plans for Designated
Facilities and Pollutants, as applicable:
(a) Subpart LLL,
Federal Plan for Existing Source Sewage Sludge Incineration Units; and
(b)
Subpart OOO, Federal Plan Requirements for Municipal Solid Waste
Landfills That Commenced Construction On or Before July 17, 2014
and Have Not Been Modified or Reconstructed Since July 17, 2014.
Source. #12387, eff 9-22-17; ss by #13381, eff
5-25-22
APPENDIX
|
Rule |
Specific Section of State or
Federal Statute or Regulation which the Rule Implements |
|
Env-A
501.01(a) |
RSA
125-C:4, I(a); 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 501.01(b) |
RSA 125-C:4, I(a); 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR
63; 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR 63 |
|
Env-A
501.01(c) |
RSA
125-C:4, I(a); 42 U.S.C. §7411(d); 40 CFR 62 |
|
Env-A
502 |
RSA 125-C:4,
I(a); 42 U.S.C. §7411(c); 40 CFR 60; 42 U.S.C. §7412(l); 40 CFR 61; 40 CFR 63 |
|
Env-A
502.01 |
RSA 125-C:4, I(a); 42 U.S.C. §7411(c), (d); 42 U.S.C.
§7412(l); 40 CFR 60; 40 CFR 61; 40
CFR 62; 40 CFR 63 |
|
Env-A
503 |
RSA 125-C:4,
I(a); 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 503.01 |
RSA 125-C:1; RSA
125-C:6, II & XI; 42 U.S.C. §7411(c); 40 CFR 60 |
|
Env-A 504 |
RSA
125-C:4, I(a); 42 U.S.C. §7412(l); 40 CFR 61 |
|
Env-A
505.01 intro, (cg), |
RSA
125-C:4, I(a); 42 U.S.C §7412(l); 40 |
|
Env-A 505.01 intro., (h) |
RSA 125-C:4,
I(a); 42 U.S.C. §7412(I); 40 CFR 63 |
|
Env-A
505.01(an) |
RSA
125-C:4, I(a); 42 U.S.C. §7412(I); 40 |
|
Env-A
505.01 intro, (cg), (cw) |
RSA
125-C:1; RSA 125-C:6, II & X; 42 U.S.C. §7412(l); 40 CFR 63 |
|
|
|
|
Env-A
506.01 |
RSA
125-C: 4, I(a); 42 U.S.C. §7411(d); 40 CFR 62 |